س 641 ح, Q641Y صمام كروي هوائي بدرجة حرارة عالية
The Q641H/Y pneumatic high-temperature ball valve consists of a metal hard-seal ball valve and a piston-type pneumatic actuator. The sealing surface uses a metal hard-seal valve seat, suitable for media with a temperature ≤500°C. The pneumatic high-temperature ball valve can be equipped with a valve positioner to input control signals (4-20mA DC or 1-5V DC) and a pneumatic power source for operation. It can also be equipped with a travel limit switch, solenoid valve, pressure reducing valve, and a 0.4～0.7MPa pneumatic power source to achieve on/off operation, and sends out two pairs of passive contact signals to indicate the valve’s opening and closing. The pneumatic high-temperature ball valve as a whole has advantages such as compact structure, حجم صغير, reliable operation, أداء الختم الجيد, easy maintenance, convenient installation, and strong adaptability.Especially suitable for applications involving viscous, particulate, or fibrous media. Pneumatic high-temperature ball valves are widely used in industrial automatic control systems in petroleum, كيميائية, educational equipment, الصناعة الخفيفة, high-pressure equipment, الصيدلانية, and papermaking industries for remote centralized or local control.
اسم المنتج: Pneumatic High-Temperature Ball Valve
نموذج المنتج: Q641H/Y
القطر الاسمي: DN15 ~ DN300
بناء: كروية
الضغط الاسمي: 1.6Mpa～16.0Mpa
طريقة الاتصال: شفة, رقاقة, الموضوع الداخلي, لحام
درجة الحرارة المطبقة: ≥550 درجة مئوية
طريقة التشغيل: هوائي (التشغيل اليدوي متاح)
مادة جسم الصمام: يلقي الصلب, الفولاذ المقاوم للصدأ
معيار التصنيع: غيغابايت (المعيار الوطني الصيني), من (المعيار الألماني), واجهة برمجة التطبيقات (المعيار الأمريكي), أنسي (المعيار الأمريكي)
الوسائط القابلة للتطبيق: ماء, زيت, الغاز, سائل
الشركة المصنعة:شركة تشجيانغ كوزو للصمامات, المحدودة.
Main Technical Parameters and Performance
القطر الاسمي DN (مم): 15～300
Actuator Model: GT, AT, AW series single/double-acting pneumatic actuators
الضغط الاسمي (الآلام والكروب الذهنية): PN1.6, 2.5, 4.0, 6.4; 10.0, 16.0, الآلام والكروب الذهنية
Supply Pressure: 0.4～0.7MPa
Valve Body Type: Two-stage cast ball valve
Air Source Interface: G1/4″, G1/8″, G3/8″, G1/2″
نوع الاتصال: Flanged, ملحومة
Ambient Temperature: -30～+70℃
Valve Core Type: “يا” type ball valve core
Actuation Type: Single-acting actuator, double-acting actuator
Sealing Packing: Flexible graphite, spiral wound gasket
Optional Accessories: Positioner, solenoid valve, air filter regulator, position holding valve, limit switch, valve position transmitter, handwheel mechanism, إلخ.
خصائص التدفق: Approximately quick-opening type Utilizing a new type of pneumatic actuator, available in double-acting and single-acting (spring return) versions, with gear and rack drive for safety and reliability; large-diameter valves employ the AW series pneumatic actuator with a fork-type drive, featuring a reasonable structure, high output force, and available in double-acting and single-acting versions.
1. Gear-type double piston design, high output torque, and compact size.
2. Cylinder made of aluminum alloy, lightweight and aesthetically pleasing.
3. Manual operating mechanisms can be installed at the top or bottom.
4. Rack-and-pinion connection allows for adjustment of opening angle and rated flow rate.
5. Actuators can be optionally equipped with electrical signal feedback indicators and accessories for automated operation.
6. ISO5211 standard connection facilitates product installation and replacement.
7. Adjustable screws at both ends allow for ±4° adjustment range between 0° and 90° for standard products, ensuring synchronization accuracy with the valve.
Operating range: 0～90°
Leakage Q: According to GB/T4213-92, أقل من 0.01% من تصنيف كيلو فولت
Applicable temperature: PPL≤300℃, hard seal≤450℃
Basic error: With positioner: less than ±2% of full stroke
Dead zone: With positioner: أقل من 2% of full stroke
نطاق قابل للتعديل: 250:1
Actuator configuration: GT, AT, AW series single and double acting pneumatic actuators
طريقة التحكم: Two-position switch control, 4-20mA analog control
س 641 ح, Q641Y Pneumatic High Temperature Ball Valve Main Design Standards
Design and Manufacturing: GB12237-89, API608, API 6D, JPI 7S-48, BS5351, DIN3357
Flange Dimensions: JB/T74～90, GB9112～9131, HGJ44～76, SH3406, ANSI B16.5, JIS B2212～2214, DIN2543
الطول الهيكلي: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202
Inspection and Testing: جي بي/تي 9092, واجهة برمجة التطبيقات 598, GB/T13927
المواد المكونة الرئيسية
س 641 ح, Q641Y Pneumatic High Temperature Ball Valve Component Name Material Name
جسم الصمام: WCB 304(CF8), 316(CF8M), 316ل(CF3M)
Ball: 2Cr13 + نيتريد, 304 316 316ل
Valve Stem: 2Cr13 304 316 316ل
Sealing Ring: Reinforced PTFE (شركته تنوي), شبه البوليسترين, Stainless Steel Sealing Ring
الوسائط القابلة للتطبيق: ماء, الغاز, بخار, زيت, إلخ.; Corrosive Media such as Nitric Acid; Corrosive Media such as Acetic Acid; Corrosive Media such as Urea
