Q641H, Q641Y pneumatisk högtemperaturkulventil
The Q641H/Y pneumatic high-temperature ball valve consists of a metal hard-seal ball valve and a piston-type pneumatic actuator. The sealing surface uses a metal hard-seal valve seat, suitable for media with a temperature ≤500°C. The pneumatic high-temperature ball valve can be equipped with a valve positioner to input control signals (4-20mA DC or 1-5V DC) and a pneumatic power source for operation. It can also be equipped with a travel limit switch, magnetventil, pressure reducing valve, and a 0.4～0.7MPa pneumatic power source to achieve on/off operation, and sends out two pairs of passive contact signals to indicate the valve’s opening and closing. The pneumatic high-temperature ball valve as a whole has advantages such as compact structure, liten storlek, tillförlitlig drift, bra tätningsprestanda, enkelt underhåll, bekväm installation, and strong adaptability.Especially suitable for applications involving viscous, partikelformiga, eller fibrösa medier. Pneumatic high-temperature ball valves are widely used in industrial automatic control systems in petroleum, kemisk, utbildningsutrustning, lätt industri, högtrycksutrustning, farmaceutisk, and papermaking industries for remote centralized or local control.
Produktnamn: Pneumatic High-Temperature Ball Valve
Produktmodell: Q641H/Y
Nominell diameter: DN15～DN300
Strukturera: Sfärisk
Nominellt tryck: 1.6Mpa～16.0Mpa
Anslutningsmetod: Fläns, Rån, Invändig tråd, Svetsning
Tillämplig temperatur: ≤550ºC
Aktiveringsmetod: Pneumatisk (Manual Operation Available)
Ventilhusmaterial: Gjutstål, Rostfritt stål
Tillverkningsstandard: GB (Kinesisk nationell standard), FRÅN (tysk standard), API (Amerikansk standard), ANSI (Amerikansk standard)
Tillämpligt media: Vatten, Olja, Gas, Flytande
Tillverkare:Zhejiang Kozo Valve Co., Ltd.
Main Technical Parameters and Performance
Nominell diameter DN (mm): 15～300
Actuator Model: GT, PÅ, AW series single/double-acting pneumatic actuators
Nominellt tryck (MPa): PN1.6, 2.5, 4.0, 6.4; 10.0, 16.0, MPa
Supply Pressure: 0.4～0,7 MPa
Typ av ventilkropp: Tvåstegs gjuten kulventil
Air Source Interface: G1/4″, G1/8″, G3/8″, G1/2″
Anslutningstyp: Flänsad, Svetsad
Ambient Temperature: -30～+70℃
Typ av ventilkärna: “O” typ kulventilskärna
Actuation Type: Enkelverkande ställdon, double-acting actuator
Tätande förpackning: Flexible graphite, spiral wound gasket
Optional Accessories: Positioner, magnetventil, air filter regulator, position holding valve, limit switch, ventillägesgivare, handhjulsmekanism, etc.
Flödesegenskaper: Approximately quick-opening type Utilizing a new type of pneumatic actuator, available in double-acting and single-acting (spring return) versions, with gear and rack drive for safety and reliability; large-diameter valves employ the AW series pneumatic actuator with a fork-type drive, featuring a reasonable structure, high output force, and available in double-acting and single-acting versions.
1. Gear-type double piston design, high output torque, and compact size.
2. Cylinder made of aluminum alloy, lightweight and aesthetically pleasing.
3. Manual operating mechanisms can be installed at the top or bottom.
4. Rack-and-pinion connection allows for adjustment of opening angle and rated flow rate.
5. Actuators can be optionally equipped with electrical signal feedback indicators and accessories for automated operation.
6. ISO5211 standard connection facilitates product installation and replacement.
7. Adjustable screws at both ends allow for ±4° adjustment range between 0° and 90° for standard products, ensuring synchronization accuracy with the valve.
Operating range: 0~90°
Leakage Q: According to GB/T4213-92, mindre än 0.01% av klassad KV
Applicable temperature: PPL≤300℃, hard seal≤450℃
Basic error: With positioner: less than ±2% of full stroke
Dead zone: With positioner: mindre än 2% of full stroke
Justerbar räckvidd: 250:1
Actuator configuration: GT, PÅ, AW-serien enkel- och dubbelverkande pneumatiska ställdon
Kontrollmetod: Two-position switch control, 4-20mA analog control
Q641H, Q641Y Pneumatic High Temperature Ball Valve Main Design Standards
Design och tillverkning: GB12237-89, API608, API 6D, JPI 7S-48, BS5351, DIN3357
Flange Dimensions: JB/T74～90, GB9112～9131, HGJ44～76, SH3406, ANSI B16.5, JIS B2212～2214, DIN2543
Strukturell längd: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202
Inspection and Testing: JB/T 9092, API 598, GB/T13927
Huvudkomponentmaterial
Q641H, Q641Y Pneumatic High Temperature Ball Valve Component Name Material Name
Ventilkropp: WCB 304(CF8), 316(CF8M), 316L(CF3M)
Ball: 2Cr13 + Nitrerad, 304 316 316L
Valve Stem: 2Cr13 304 316 316L
Sealing Ring: Reinforced PTFE (PPL), Para-polystyren, Stainless Steel Sealing Ring
Tillämpligt media: Vatten, Gas, Ånga, Olja, etc.; Corrosive Media such as Nitric Acid; Corrosive Media such as Acetic Acid; Corrosive Media such as Urea
