美国API, ANSI Q47F 锻钢固定球阀
The Q47F forged steel fixed ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Its strength, safety, and resistance to harsh environments have been specially considered in its design, making it suitable for various corrosive and non-corrosive media. Compared to floating ball valves, during operation, the force generated by the upstream fluid pressure on the ball is entirely transferred to the bearing, preventing the ball from moving towards the valve seat. 所以, the valve seat deformation is small, the sealing performance is stable, and the service life is long, making it suitable for high-pressure, large-diameter applications.
产品名称: Forged Steel Fixed Ball Valve
产品型号: Q47F
公称直径: DN50～DN1200
结构类型: 球形
公称压力: 1.6Mpa～32.0Mpa
Connection Type: 法兰
适用温度: -20～180℃
驱动方式: 手动的, Electric, Pneumatic
阀体材质: A105 Forged Steel, WCB Cast Steel, 不锈钢
制造标准: 国标 (中国国家标准), 从 (德国标准), 应用程序编程接口 (美国标准), 美国国家标准协会 (美国标准)
适用媒体: 水, 油, 气体, Gases, and Certain Corrosive Liquids
制造商: 浙江科三阀门有限公司, 有限公司.
The Q47F forged steel fixed ball valve is a new generation of high-performance ball valve, suitable for long-distance pipelines and general industrial pipelines. Its strength, safety, and resistance to harsh environments have been specially considered in its design, making it suitable for various corrosive and non-corrosive media. Compared to floating ball valves, during operation, the force generated by the upstream fluid pressure on the ball is entirely transferred to the bearing, preventing the ball from moving towards the valve seat. 所以, the valve seat deformation is small, the sealing performance is stable, and the service life is long, making it suitable for high-pressure, large-diameter applications. The advanced spring-loaded pre-seat assembly has self-tightening characteristics, achieving upstream sealing. Each valve has two seats, providing sealing in both directions, thus eliminating flow direction restrictions and allowing for bidirectional operation. This valve is available in two-piece and three-piece body structures. The middle flange is bolted together, and the seal uses reinforced PTFE embedded in a stainless steel ring. A spring at the rear of the steel ring ensures the valve seat remains tightly against the ball, maintaining a seal. Both the upper and lower valve stems are equipped with PTFE bearings to reduce friction and simplify operation. The small shaft has no adjusting slab at the bottom, ensuring proper contact between the ball and the sealing ring. The full-bore structure ensures that the valve flow orifice matches the pipeline inner diameter, facilitating pipeline cleaning.
美国API, ANSI Q47F Forged Steel Fixed Ball Valve Product Features
1. Structural Features: A fixed ball valve is a ball valve with a fixed shaft. Fixed ball valves are mainly used for high-pressure, large-diameter applications. Depending on the installation of the valve seat seal ring, fixed ball valves can have two structures: a valve seat with a front seal on the ball and a valve seat with a rear seal on the ball.
2. Integral Structure: Features include full-bore operation, emergency sealing, and fire resistance.
3. Full Bore: The valve flow passage diameter matches the pipe’s inner diameter, facilitating pipeline cleaning.
4. Blockage and Drainage: When the valve is closed, the upstream and downstream valve seats block the flow, allowing accumulated material in the valve body cavity to drain. The drainage device has the following functions:
① Pre-checks for valve seat leakage or damage;
② Reduces valve contamination during media changes;
③ Allows replacement of the valve stem packing gland when the valve is fully open or fully closed under operating pressure. (As shown in Figure 5, the drain device is a drain plug.)
5. Automatic Pressure Relief: When the medium stagnating in the valve cavity experiences an abnormal temperature rise due to increased temperature, the safety valve installed on the valve seat or valve body can automatically relieve pressure.
6. Fireproof Structure: Utilizing a double seal, in the event of a fire, after the non-metallic valve seat is burned, the medium presses the sphere against the metal sealing surface on the valve body, preventing large-scale leakage, conforming to API 607 standards.
7. Emergency Sealing: When leakage occurs due to damage to the valve seat and valve stem seals, injecting sealing grease through the grease injection valve can provide an instantaneous emergency seal.
8. Extended Valve Stem: An extended valve stem is suitable for underground installations and cryogenic media. The extended dimension is determined according to requirements. Operating methods include manual, 气动, 电的, pneumatic-hydraulic linkage, and hydraulic operation.
美国API, ANSI Q47F Forged Steel Fixed Ball Valve Main Performance Parameters
Test Pressure (MPa) 公称压力 (MPa) Pressure Class
1.6 2.5 4.0 6.4 10.0 16.0 25.0 150 300 400 600 900 1500
强度测试
2.4 3.8 6.0 9.6 15.0 24 37.5 3.1 7.8 10.2 15.3 23.1 38.4
Sealing Test
1.8 2.8 4.4 7.0 11.0 17.6 27.5 2.2 5.6 7.5 11.2 16.8 28.1
Air Tightness Test
0.5-0.7
Operating Temperature
PTEE≤150℃
PTEE≤300℃
Carbon Fiber≤350℃
Applicable Media C: 水, 油, gas, vapor; P: Nitric acid derivatives (temperature ≤ 200℃); R: Acetic acid derivatives (temperature ≤ 200℃)
Main Component Materials
Item No. Part Name Material
GB ASTM
1 Valve Body WCB, A105 A182 F316
2 Spring 60Si2Mn 316
3 Sealing Ring Reinforced PTFE Reinforced PTFE
4 Gasket Flexible Graphite + Stainless Steel Flexible Graphite + 316
5 Drain Plug 25 316
6 O-ring Rubber Rubber
7 Bottom Cover A105 316
8 Screw 35 316
9 Valve Stem 2Cr13 + Nickel-Phosphorus Plated 316
10 Sliding Bearing Stainless Steel + 聚四氟乙烯 316 + TPFE
11 Ball A105 + Nickel-Phosphorus Plated A182 F316
12 Valve Seat A105 + Nickel-Phosphorus Plated 316
13 Stud 35CrMoA 316
14 Nut 35 316
15 Pressure Sleeve A105 316
16 Packing PTFE PTFE
17 Packing gland WCB A216-WCB
18 Key 45 316
