나사형 유압 플로트 밸브의 기능 및 특성
In summary, the threaded float valve plays an important role in liquid level control. Through its automatic water replenishment and water stop functions, it ensures the stability and safety of the water level in the container. 동시에, its simple structure, 안정적인 작동, and convenient adjustment make the threaded float valve an ideal choice for various occasions that require liquid level control.
1. Threaded hydraulic float valves Liquid level control
Automatic water replenishment and water stop: Threaded float valve is usually installed at the water inlet of a pool, water tower or water tank. When the water level drops, the float sinks and drives the valve to open through the connecting rod or transmission mechanism, allowing water to enter the container to achieve automatic water replenishment. When the water level reaches the set height, 플로트가 떠오른다, and the valve is also closed through the connecting rod or transmission mechanism to stop water supply. This process ensures that the water level in the container always remains within the set range.
Prevent overflow: By accurately controlling the rise and fall of the water level, the threaded float valve effectively prevents the container from overflowing due to excessive water levels, avoiding waste of water resources and potential safety hazards.
2.Threaded hydraulic float valves Wide application
Threaded float valves are widely used in various situations requiring liquid level control due to their simple structure, 안정적인 작동, 그리고 쉬운 유지 보수, including but not limited to:
Domestic water systems: such as water tanks and pools in residential buildings, the water level is kept stable through threaded float valves to ensure the continuity and safety of residents’ water use.
Industrial water system: In cooling towers, water storage tanks and other equipment in factories and workshops, threaded float valves are used to control the rise and fall of water levels to meet the water needs of industrial production.
Agricultural irrigation system: In farmland irrigation systems, threaded float valves can automatically adjust the amount of irrigation water according to changes in water level, improve irrigation efficiency, and achieve conservation and utilization of water resources.
3. Threaded hydraulic float valves Features and advantages
Simple structure: Threaded float ball valve is composed of float, connecting rod or transmission mechanism, valve and other components. It has compact structure and is easy to install and maintain.
Reliable operation: Since the working principle of the threaded float ball valve mainly relies on buoyancy and is not affected by electrical or electronic factors, it has high reliability. It can maintain normal operation even in harsh environments, such as high temperature, high pressure or corrosive environments.
Easy to adjust: The liquid level control range of the threaded float valve can be achieved by adjusting the position of the float or the length of the connecting rod to meet the liquid level control needs of different occasions.
Long service life: The float and valve components made of corrosion-resistant materials have good wear resistance and corrosion resistance, extending the service life of the threaded float valve.
4. Threaded hydraulic float valves Precautions for use
Preparation before installation: Before installing the threaded float valve, make sure there are no foreign objects in the pipeline to avoid blocking the valve or affecting the normal opening and closing of the valve.
Regular inspection and maintenance: The working status of the threaded float valve should be checked regularly during use. If the switch is found to be abnormal or leaking, it should be repaired or replaced in time.
Set up an overflow port: In order to ensure safety, the container should be equipped with an overflow port and connected to the drainage pipe to prevent overflow accidents caused by excessive water levels.
