Product Overview
The KOZO WCB Linear Motion Control Valve is designed for modulating control of flow, pressione, level or temperature in industrial process systems. A linear stem moves the plug relative to the seat, allowing the effective flow area to be adjusted continuously according to the control signal.
Key Design Features
- Linear-motion trim: Suitable for modulating control over a wide operating range.
- WCB body: Reference cast carbon-steel construction for general industrial process service.
- Actuator flexibility: Pneumatic diaphragm/piston or electric actuators can be selected according to the control requirement.
- Positioner compatibility: Digital or analog positioners can be supplied for closed-loop control.
- Replaceable trim: Plug, seat and cage materials can be selected for erosion, cavitation and corrosion conditions.
Technical Specifications
| Tipo di valvola | Linear Motion Control Valve |
|---|---|
| Body Material | ASTM A216 WCB |
| Gamma di dimensioni | DN15 – DN600 |
| Pressure Classes | ASME Class 150 – 600 |
| Design Standard | ASME B16.34 |
| Control-Valve Standard | IEC 60534 / ISA 75.03 |
| Seat Leakage | IEC 60534-4 / ANSI FCI 70-2 according to selected trim |
| Attuazione | Pneumatico / Elettrico |
| Typical Service | Industrial modulating control |
Typical Applications
- Flow control
- Pressure regulation
- Temperature-control loops
- Level-control systems
- Vapore, water, gas and compatible process fluids
Trim Selection
Control-valve performance depends heavily on trim selection. Required Cv, pressure drop, noise, cavitation, flashing, erosion and leakage class should be reviewed before specifying plug, cage and seat materials.
Actuator and Positioner Options
Actuator thrust and fail action should be selected from differential pressure, stem force, air supply or electrical power, fail-open/fail-close requirement and required control speed. Positioners, solenoid valves, limit switches and air filter regulators can be supplied as required.
How to Specify This Valve
Please provide line size, required Cv, inlet/outlet pressure, flow rate, medium, temperature, density, control signal, fail position, leakage class, body/trim material and actuator preference.
FAQ
What information is needed to size a control valve?
Flow rate, upstream/downstream pressure, temperature, fluid properties and required control range are essential for correct sizing.
Can this valve be supplied with a digital positioner?
Yes. Digital or analog positioners can be selected according to the plant control system and communication requirement.
